Heat Exchanger Galvanized Sheet Circular L/LL/KL Type Fin Tube Supports: The fin strip is welded continuously and spirally wound onto a polished bare tube. And the tube and fins are bonded together by using high frequency resistance welding technique; We produce both solid plain and serrated helical welded steel finned tube. And also, all spiral welding tubes could be bent in the middle or at the end of fin tubes, we call it Hairpin tubes.
Tension Wrapped Refrigeration and Heat Exchanger Helical L/LL/KL Type Fin Tube: The fin strip is welded continuously and spirally wound onto a polished bare tube. And the tube and fins are bonded together by using high frequency resistance welding technique; We produce both solid plain and serrated helical welded steel finned tube. And also, all spiral welding tubes could be bent in the middle or at the end of fin tubes, we call it Hairpin tubes.
C12200 C70600 Core L/LL/KL Type Fin Tube OD25.4X1.245mm: Tube ends are square cut, free burrs, internally dried and air blown clean, externally coated with varnish at both ends of extruded bimetallic fin tube.
Hexagonal AISI 304 Tube Supports For L/LL/KL Type Fin Tube OD 2 1/4'': Tube ends are square cut, free burrs, internally dried and air blown clean, externally coated with varnish at both ends of extruded bimetallic fin tube.
Galvanized Steel Sheet Spacer Rings For Wrapped Tension Fin Tubes: Galvanized steel sheet spacer rings for wrapped tension fin tubes; This spacer rings are applicable for aluminum fin tubes, as extruded fin tubes, L/LL/KL fins tubes and most used for G base fin tubes; General core tube OD is, 25.4mm,31,75mm and 38.1mm.
2'' Copper Finned Tube Type L Tension Copper Finned Tubes With 3/4'' Tube OD: The fin strip is welded continuously and spirally wound onto a polished bare tube. And the tube and fins are bonded together by using high frequency resistance welding technique; We produce both solid plain and serrated helical welded steel finned tube. And also, all spiral welding tubes could be bent in the middle or at the end of fin tubes, we call it Hairpin tubes.
